For some, when you invest in a vehicle it’s more than just a commuter. Sometimes, it’s a statement and an object that shows people what kind of person you are. Every vehicle has headlights, but if standing out is what you’re after, Anzo USA has you covered. What better way to stand out while bettering the looks of your ride and gaining better light exposure?
Today, we’re looking at a headlight install on the 2015-2017 GMC Sierra 1500, 2500, and 3500 HD pick-up trucks (PN 111371). The headlights not only change the look of the truck, but add Anzo’s switchback technology.
When removing headlights from a truck, you risk scuffing up your bumper on its way out. One safe practice is to use painters tape across the bumper to protect from any scratching on your ride. You must remove the grill to access the headlights on the 207 Sierra which gives you easy access to the lights.
Once you have removed all of the necessary trim and plastics, you’re ready to remove the factory headlight. The headlight is contained by four bolts. Two bottom bolts and two upper bolts. On the upper passenger side bolt, you’ll need to pull back some rubber stripping to access the bolt head. Once you’ve got the headlight loose, the only remaining thing is to disconnect the headlamp from the wiring of the truck.
With the old headlight out it is repeating we merely repeated the steps on the other side of the truck. With both of the Anzo headlights installed, it was time to get the grille back on and see the final look of the truck.
When reinstalling the grille, make sure that the grill snaps into place properly. If you don’t get it snapped into place, the grill could fall out and be damaged. All of the grills have push fasteners that can be seen with the grill removed.
Before you hit the road, check for the proper headlight, marker light, and blinker function to ensure everything is working properly. For more information on all the products from ANZO USA, check out their website.