You can now take your Edge monitor and your truck to the next level with Edge’s latest news. Edge’s all-new EAS (SOTF) Shift-On-The-Fly allows you to change custom tunes on the fly by utilizing your Edge Insight CS2 or CTS2 monitor. The EAS SOTF line has been selling at a tremendous pace and they are excited to extend coverage to the older Duramax-powered trucks.
The new EAS SOTF software part numbers cover the 2001-2010 6.6-liter Duramax trucks. You can now change the tunes of your truck right from your screen. Many companies use a voltage signal to change between their five tune levels, but instead of drilling a hole in your dash for a switch, just add the EAS SOTF accessory to an Insight monitor to control while cruising down the road.
Available For:
2004.5-2010 Chevrolet/GMC 2500/3500 6.6 -liter LLY, LBZ, LMM Duramax
2001-2004 Chevrolet/GMC 2500/3500 6.6-liter LLY, LBZ, LMM Duramax
Here Is How It Works:
- The EAS Shift-on-the-fly accessory, connected to your Insight CS2 or CTS2, will control your tune levels for vehicles requiring a switch to control the power levels.
- Switching occurs by changing voltages between 1v, 2v, 3v, 4v, 5v. Most custom-tuned vehicles run within these parameters.
- Wire the switch in just as you would your normal Shift-On-The-Fly (SOTF) or Driver-SelectableTuning (DST) switch. Then, flash the tune into your Duramax that enables the SOTF/DST functions.
- Enjoy changing your power levels right through the Insight CS2 or CTS2 screen.
When you’re ready to hook your truck up to the latest and greatest, you can check out the Edge Products website here to get yours today. Stay tuned to Diesel Army for the latest in the diesel performance industry.
