Industrial Injection Dropped The Phatshaft Thunder 330 Turbo Kit

Budget-friendly, a painless installation, and thundering performance. That’s the catchphrase coming out of Salt Lake City, Utah from our friends at Industrial Injection as they’ve just released the details on their newest item to hit the shelves, the Thunder 330 Turbo Kit. This is the latest turbo kit for the Cummins-powered machines from 2007.5 to 2018.

The Thunder 330 was designed to handle multiple fueling upgrades and comes equipped with an extended tip 62mm FMW compressor wheel and 6 pad 360-degree thrust bearing. The Thunder 330 utilizes the 74mm turbine wheel and has an appealing compressor housing. The Thunder 330 uses a .80 A/R exhaust housing in which they modify the angle of the exhaust nozzle, maximize the wastegate ports, and enlarge the wastegate chamber for full wastegate travel.

Shown are both kits that are ready to turn your 2007.5-2018 RAM into a powerhouse!

Don’t leave your 6.7-Liter Cummins-powered RAM in the dark. From 2007.5 to 2012, Industrial has you covered. From 2013 to 2018, you’re still covered with a Thunder 330 Kit. These kits come fully equipped with everything needed to complete the install. This includes the Thunder 330 turbo, a two-piece exhaust manifold, exhaust manifold gaskets, turbo gasket, oil drain tube, and intercooler boot for the 13+ models. It doesn’t get any easier than this, guys.

The Thunder 330 can support over 600hp and is one of the best all-round performance turbos on the market. For more information about Industrial Injection and their latest products, be sure and check out their website here. For more parts reviews, installs, truck features, and event coverage stay tuned right here to Diesel Army.

Article Sources

About the author

Artie Maupin

Artie Maupin is from Southeast Missouri and has an extreme passion for anything diesel. He loves drag racing of all kinds, as well as sled pulling competitions.
Read My Articles