When it comes to restoring your project car, you will probably need to melt some metal together. Welding does not have to be an expensive operation with tons of experience required to do the job well. Eastwood’s new MIG 250 is the perfect unit for the home garage builder.
The MIG 250 is affordable and portable, which makes it perfect for the do-it-yourselfer. It runs off of 120 volt power and will handle steel up to 18 gauge with no difficulty. Need to do a bigger job with thicker steel? (Wait for it…wait for it) … simply plug it into a 220 volt socket and weld steel up to a half inch thick.
That’s right, a dual voltage welder for the DIY crowd. In the 220 volt setting the welder has the power to handle a 60 percent duty cycle making it a serious tool that delivers professional results.
- Powered by 120 or 240 volt
- Infinitely adjustable 30-250 amp welding range
- 60 percent duty cycle at 250 amp setting
- Weighs 66 pounds
- Torch cable length, 10 feet
- Ground cable length, 10 feet
- State-of-the-art inverter technology
- Uses 4- or 8-inch wire spool
- Optional spool gun for aluminum wire
- Binzel A2/24 torch that uses commonly available consumables
- Three-year warranty
Eastwood HVLP Paint And Detail Gun Kit
Getting great results from DIY paint kits is not as difficult as it has been in the past with Eastwood’s Concours PRO spray gun line. The most recent addition to the Concours Pro line is a two-gun kit. According to Eastwood’s Kevin Tetz, “this is a paint shop in a box.”
The quality tools are the key to achieving a flawless finish without fighting the equipment so you can focus on the job and not the tools. The Eastwood bonus comes with owning quality tools with a DIY price tag. “Eastwood’s goal was to offer paint guns that spray like $700 guns, but for a fraction of the cost,” said Nick Capinski, Eastwood director of product solutions. “These guns deliver on performance, price and value”.
These Concours Pro guns feature stainless steel internal passages, so they can be used with solvent and waterborne coatings, and are engineered specifically to work with smaller compressors.
The complete kit combines the full-sized Concours PRO paint gun, a smaller detail gun, extra tips, cleaning kit, air regulator and cup, all packed into a lockable aluminum storage case.
- Professional quality at a DIY price
- Low CFM – Full-size gun 6.5 cf. at 30 psi,
- Detail gun 3 cf. at 22psi
- Ultra-fine atomization
- Compatible with all types of coatings
- Includes regulator, cleaning kit and storage case
Contents Of The Kit:
- Concours PRO full size HVLP paint gun
- Concours PRO HVLP detail gun
- 1.3 mm needle/nozzle set
- 1.7 mm needle/nozzle set
- 2.0 mm needle/nozzle set
- Aluminum storage case
- One 600 cc plastic cup
- One 100 ml plastic cup
- Cleaning kit
- Air regulator