Why SPE Motorsport Invested In Tooling For Its Own CP3 Fuel Pump

Evander Espolong
•
November 17, 2026

Every 6.7-liter Power Stroke owner swapping out the vulnerable factory CP4.2 injection pump relies on a 6.7-liter Cummins-spec CP3 Fuel Pump to bulletproof the fuel system.

Because newer Ram heavy-duty pickups no longer leave the factory with a CP3, high-volume OE production for that specific configuration is drying up.

To keep its conversion kits off the backorder list, SPE Motorsport bypassed distributors and invested in its own production tooling under its Modifuel brand.

CP3 Fuel Pump

Buying Tooling For A Proprietary CP3 Fuel Pump

While variants of the Bosch pump still run in European commercial trucks and heavy equipment, the 6.7-liter Cummins unit uses a specific front mounting cover and rear gear lift pump.

When SPE Motorsport co-founder Dan Snyder approached the manufacturer about future inventory, the supplier warned that without an OEM contract, new units would eventually vanish and leave only core rebuilds on the market.

“So what we had to do is we had to invest in tooling so that we could do the diecast and the forging for the front cover on a higher volume level and obviously do our own version of the gear pump so that we could have our own version of this,” Snyder says.

CP3 Fuel Pump
CP3 Fuel Pump

Upgraded Heat Treat And DLC Internals

Developing the Modifuel CP3 Fuel Pump allowed SPE to upgrade the metallurgy beyond factory cost limits. Externally, the front aluminum housing skips factory bead blasting in favor of a raw machined finish with tighter surface roughness tolerances, while the rear gear pump casting edges are machined smooth.

The main steel body also displays a darker color from a deeper heat-treatment process. Inside the housing, the plungers, eccentric, and camshaft receive an upgraded diamond-like carbon treatment. “We did a better DLC finish on the internal components because that’s what we want,” Snyder explains.

CP3 Fuel Pump
CP3 Fuel Pump

O-Ring Plugs And Conical Shaft Protection

Standard replacement pumps often ship wrapped in thin plastic inside a cardboard box, allowing the protective sleeve to slip off the tapered drive shaft and expose the threads.

SPE ships every Modifuel unit inside a pre-cut foam box with an individual test-bench flow sheet. A threaded nut and rigid plastic cone protect the conical shaft taper, while threaded O-ring plugs replace push-in plastic dust caps to keep cardboard debris out of the fuel ports.

CP3 Fuel Pump

Direct Supply For Power Stroke And Cummins

Cutting out middleman distributors lets SPE pass lower pricing to 6.7-liter Power Stroke conversion buyers and 6.7-liter Cummins owners alike.

Customers ordering an SPE conversion kit can choose the Modifuel unit, a standard Bosch pump, or an Exergy-prepped pump with direct in-house testing and warranty support.