Josh Patterson’s 1955 Chevy stepside 4×4 pickup has been part of his life for more than 25 years. During that time, the truck has undergone a massive transformation, evolving from a small-block Chevy-powered daily driver into a Cummins-powered rig with a custom chassis and 1-ton axles. The truck is an ongoing project, and its history includes some interesting twists. One of the coolest parts of the truck is that Josh has only about $300 invested in the truck’s 12-valve Cummins turbodiesel engine.

A Rattlesnake’s Rattle Hints At The Truck’s History
Josh, who lives in Whiteland, Indiana, purchased the Chevy in 1999, shortly after his 20th birthday. Little is known about the truck’s history. However, the condition of the body and a rattlesnake’s rattle found in the windshield track during disassembly hints the truck may have spent part of its life in the Southwest.
When Josh purchased the truck, it was powered by a small-block Chevy V8 and rode on a K5 Blazer chassis. He wasted little time modifying it. In fact, just three days after purchasing the truck, he installed a 6-inch suspension lift and 35-inch tires.
The Chevy served as his daily driver for about five years before he began its extensive rebuild in 2004. Over the following decade, the truck underwent a slew of modifications including a swap to a custom chassis he made from 2×6-inch tubing paired with homemade body and leaf-spring perches.
12-Valve Cummins Power On The Cheap
Under the Chevy’s hood is a 12-valve Cummins turbodiesel sourced from a wrecked 1997 Dodge pickup with just 102,000 miles. Josh purchased the entire truck for $1,200, removed the engine, and sold the remaining parts. When the dust settled, he had only about $300 invested in the Cummins.
The engine was already equipped with a P-pump, 100-horsepower injectors, and modifications to its fuel system when Josh acquired it. He retained those upgrades and set the engine on mounts sourced from his parts collection.
The Cummins exhales through a 4-inch-diameter exhaust system that terminates in a 6-inch-diameter chrome stack. Fuel is supplied from a JEGS-sourced tank secured with custom mounts. The system includes an Aeromotive A3000 pump and an aftermarket fuel filter mounted near the rear of the truck. Engine cooling is handled by a modified aftermarket radiator and a manually switched electric fan. And on the topic of electrical items, there’s an Optima RedTop battery helping provide amperage.
Beefed-Up Transmission And Heavy-Duty Axles
Backing the Cummins is a 47RH four-speed automatic transmission that Josh found on Facebook Marketplace and had rebuilt with upgraded components. A B&M Z-Gate shifter controls the transmission, which sends power to a salveage-yard-sourced NP205 transfer case.
The Chevy’s front axle is a kingpin Dana 60 from a Dodge truck, while the rear is a GM Corporate 14-bolt. Both axles were sourced from a friend and retain 4.10:1 gearing. The rear axle has been upgraded with a disc brake conversion.
Six Inches Of Lift And 38-Inch Tires
The Chevy’s suspension includes a 6-inch Superlift leaf-spring lift up front. Out back, the truck is also lifted six inches and includes 3/4-ton Chevy leaf springs and 4-inch lift blocks along with Rancho shocks. Josh is currently fabricating front shock hoops, hence the lack of shocks in these photos.
The truck rolls on 38×15.50R18LT Nitto Mud Grappler tires mounted on Mickey Thompson wheels.

Classic Chevy Looks With Custom Touches
The Chevy’s satin-black exterior retains the unmistakable styling of a 1955 stepside pickup. During the rebuild, Josh installed new front fenders, doors, floorboards, and he reconstructed the interior steps. Many of the body parts were sourced from LMC Truck. The fiberglass rear stepside fenders were already on the truck when he purchased it.
The front bumper is factory Chevy, but the rear bumper has an unconventional origin. Josh fabricated it from fence posts.
Inside, the truck features a steering column sourced from a Chevy S-10 and an original-style 1955 Chevy seat that Josh found on Facebook Marketplace and had re-covered.

More Mods In The Works
After more than 25 years of ownership, the Chevy remains a work in progress and Josh has more plans for his rig when he can carve out some time from his busy construction career.
Josh’s rare truck with its grumbly turbodiesel turned a lot of heads at the 4-Wheel Jamboree Fall Nationals, where he told us, “This truck is a handful, but is a lot of fun to drive because of the attention it receives.”
You might also like
Using A Standalone Wiring Harness For Your Next Cummins Swap
Greg Alberalla uses a standalone harness to simplify wiring his Cummins swap. The custom loom moves the factory computer inside the cab.