aFe Power introduces new F3 Torque Converter Lines for Diesel Trucks, lowering stall speed and transmission fluid temperatures, while increasing towing speeds, drive-ability. aFe Power’s new F3 Torque Converter is engineered with a 3-clutch pack assembly for three times the torque capacity compaired to stock, and includes: round clutch tips, a custom designed stator, Torrington thrust bearings, a Billet steel front cover, turbine fins and Dampening Springs, all backed by aFe Power’s lifetime limited warranty.    

Official Release:

Corona, Calif. – aFe Power announces the release of the F3 Torque Converter Lines for Diesel Trucks. Torque converters are responsible for transferring engine power to the transmission. Single clutch OE torque converters can slip and increase transmission fluid temps. As you add engine performance parts like intakes, manifolds, etc. the factory torque converter’s stall RPM rises thus reducing the available low RPM pulling power. This is where the F3 torque converter comes in. Installing the F3 torque converter will lower your stall speed to as low as 1,200RPM giving you the perfect range for diesel trucks up to 1,000hp. The results of using an F3 torque converter are improved 0-60mph times (by up to 1-second), increases in towing speeds, lower transmission fluid temperatures and a more satisfying driving experience.

The F3 Torque converters use a 3-clutch pack assembly which offers up to 3 times the torque capacity of the single clutch OE torque converter. This allows crisper shifts in high gears, smoother power transmission and improved pulling power while reducing transmission fluid temperatures. Round clutch tips are used to optimize fit and clutch wear. A custom designed stator (with one-way sprag clutch) is used for torque multiplication to stall speed. F3 Converters come with Torrington thrust bearings for maximum strength replacing the stock OE plastic bushings.

The billet steel front cover is used for increased strength and durability over the factory stamped steel cover. This Billet cover prevents converter ballooning (failure) that is common with OE converters under high torque conditions. The turbine fins are responsible for transferring the torque from the engine to the transmission. The F3 turbine fins are brazed for maximum strength even under the harshest conditions and high torque transfer. Damping Springs are used on the clutch assembly for a smooth power transition during acceleration, optimizing your available torque. The one-piece stamp forged steel lid uses reinforced ribs for structural support and ultra-high torque capacity. The F3 torque converter comes with a limited lifetime warranty.

Features:

• Engineered with 3-clutch pack assembly for 3 times the torque
• Round clutch tips optimize fit and clutch wear
• Also includes: Billet steel front cover, custom designed stator, Torrington thrust bearings, F3 turbine fins, and Damping Springs
• Backed by aFe Power’s lifetime limited warranty