EFILive has pre-released CSP5 custom operating system and Enhanced Data Acquisition (EDA) for the 2010-2015 6.7L Cummins customers. It allows the customer to switch quickly between various tunes stored on the ECM flash memory. Check out the official release below.

Official Release:

EFLive is pleased to announce the public pre-release of CSP5 and Enhanced Data Acquisition (EDA) for 2010-2015 6.7L Cummins Customers.

CSP5, EFILive’s custom operating system for the Cummins CM2200 and CM2350B ECM’s allows customers to switch ‘on the fly’ between a number of different tunes, all stored in the ECM’s flash memory. By having multiple tunes instantly accessible, customers no longer need to re-flash their ECM to change their tunes to suit changing conditions (e.g. racing, towing or power limiting). Simply build up your tunes, flash the ECM once and then select your desired tune through your EFILive hardware (or other approved switching devices) at any time.

Historically, Cummins Switchable Performance had 5 tune positions; however as supported Cummins platforms have expanded this no longer holds true. ECM memory now defines the number of tunes that are available for switching for each ECM type as per the table below.

Whilst different controllers contain different numbers of tunes, the key tuning parameters have been preserved across all supported platforms allowing a range of tuning strategies to still be used to achieve desired results.

EDA development has created a single group of 49 hand selected parameters deemed as essential for tuning feedback. This logging development creates the first comprehensive scan tool for 2010-15 Cummins vehicles and sets the benchmark for all future products. The release of EDA will provide the foundation for future parameter development – finally a tool exists to review current tuning limitations.

This CSP5 and EDA functionality release is a FREE software update to all EFILive customers. To access these features, customers must update their V8 and V7 software, along with their FlashScan V2/AutoCal firmware to our May 11, 2015 Public Pre-Release software software (or later). Upgrade documentation can be found in the EFILive V8 Scan and Tune software by navigating to Help -> Documents.

Features:

• Suitable for 2010-2015 6.7L Cummins applications
• CSP5 allows customers to switch tunes “on the fly”
• No need to re-flash ECM to change tunes with multiple tunes available
• Switch between towing, racing, etc. in a flash
• Logging development creates first comprehensive scan tool for 2010-2015 Cummins vehicles
• The key tuning parameters have been preserved across all supported platforms allowing a range of tuning strategies to still be used to achieve desired results