Fed With Fuel: Fleece Performance Fuel Block And Hose Kit

When you’re pushing a bunch of horsepower, it is critical that you have the fuel system to back it up. On Project DeadSpool, we’re running not one but two CP3 high-pressure pumps. With the large injectors we run, it was necessary to have two pumps versus one to keep up with the desired pressure. When you have twin pumps, you need to plumb two separate lines from your fuel source. With Fleece Performance‘s Fuel Distribution Block and Hose kit, we can now plumb to our twin pumps and really clean up our engine bay.

Before you install a fuel distribution block, there is steel plumbing in the engine bay that really get nasty over time. With a completely fresh engine, with an all-new paint job, we couldn’t leave it as is. With the Fleece fuel block and line kit, we would discard those steel lines and replace them with the provided hoses and AN fittings.

On these fuel blocks, they cover all needed plumbing. Your feed line from the fuel source, two feeds for both injection pumps, and the return lines for back to the tank.  It comes complete with all of the high quality AN fittings and push lock hose needed to cleanly plumb your dual CP3s with their Fuel Distribution Block.

The block is simple to install as it goes in place of your factory fuel filter bowl. By removing the factory bowl, your two mounting holes are exposed and reused to fasten the block to the engine. Once the block is tight, you’re ready to plumb your hoses. The hose kit comes with a healthy length of hose that gives you the option to cut the hoses at the lengths you want.

We cut our hoses to perfect length and attached them to all of our push lock fittings. These push lock fittings are barbed ends which ensures you a safe and non-leaking connection.

With the block installed on our engine, we are pleased with how well it cleaned up the driver side of the engine. With all of the steel lines removed from that area, it really makes this engine stand out from the rest. Don’t waste your time with a Y-block. Get your build a Fleece Fuel Distribution Block and Hose kit today.

For more information about Fleece Performance, be sure and check out their website.

 

Article Sources

About the author

Artie Maupin

Artie Maupin is from Southeast Missouri and has an extreme passion for anything diesel. He loves drag racing of all kinds, as well as sled pulling competitions.
Read My Articles

Rolling coal in your inbox.

Build your own custom newsletter with the content you love from Diesel Army, directly to your inbox, absolutely FREE!

Free WordPress Themes
Diesel Army NEWSLETTER - SIGN UP FREE!

We will safeguard your e-mail and only send content you request.

Diesel Army

We'll send you the most exciting Diesel articles, news, truck features, and videos every week.

Diesel Army

Diesel Army NEWSLETTER - SIGN UP FREE!

We will safeguard your e-mail and only send content you request.

Diesel Army

Thank you for your subscription.

Subscribe to more FREE Online Magazines!

We think you might like...



Off road, Jeeps, 4x4s

Engine Tech

Drag Racing

Diesel Army

Thank you for your subscription.

Subscribe to more FREE Online Magazines!

We think you might like...

  • Off road, Jeeps, 4x4s
  • Engine Tech
  • Drag Racing

Diesel Army

Thank you for your subscription.

Thank you for your subscription.

Diesel Army

Thank you for your subscription.

Thank you for your subscription.

Loading